{"id":2942,"date":"2015-11-03T07:16:00","date_gmt":"2015-11-03T07:16:00","guid":{"rendered":"https:\/\/wiki.melberi.com\/uncategorized\/bsnl-broadband-internet-configuration-for-linux-ubuntu-fedora-redhat-suse"},"modified":"2017-10-24T09:32:25","modified_gmt":"2017-10-24T09:32:25","slug":"bsnl-broadband-configuration","status":"publish","type":"post","link":"https:\/\/www.melberi.com\/wiki\/broadband\/bsnl-broadband-configuration","title":{"rendered":"BSNL Broadband Internet Configuration for Linux Ubuntu Fedora CentOS"},"content":{"rendered":"
\n

BSNL or Airtel Broadband Internet Configuration for Ubuntu \/Fedora \/Redhat Linux<\/span><\/u><\/span><\/h2>\n

There is no special settings required for connect and configure BSNL Broadband mode on Linux platforms.
\nBSNL Broadband modem is already per-configured.
\nSo most of the cased, it will work with the default settings itself.<\/span><\/span><\/p>\n

Automatic settings:<\/span><\/u><\/span><\/span><\/h3>\n

<\/h3>\n

1) Verify whether your network card driver is installed on Ubuntu .<\/span><\/span>
\n2) Connect the Network cable between system and modem (ADSL router)
\n2) Enable Automatic IP configuration on Linux<\/span><\/span>
\ngo to System—>Administration —>Networking<\/b><\/span><\/span>
\n
\n<\/span><\/p>\n

\"BSNL<\/a><\/span><\/div>\n


\n<\/span>
\n<\/span><\/p>\n

\"BSNL<\/a><\/span><\/div>\n


\n<\/span>
\n<\/span><\/p>\n

<\/a><\/span><\/div>\n


\n<\/span><\/span>
\n
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span> \u00a0<\/span><\/span>
\nSelect Automatic Configuration and click OK. <\/span><\/span>
\nBy default BSNL modem is configurred to supply ip address for the system connected to it (DHCP Server will be running).<\/span> <\/span>
\nModem IP will be – 192.168.1.1 , subnet mask- 255.255.255.0, Modem will supply an IP for the system.<\/span><\/span><\/span><\/span>
\nSystem IP will be – 192.168.1.2 , Subnet – 255.255.255.0, Gateway – 192.168.1.1 <\/span><\/span><\/span><\/span>
\nNow you can start browsing the internet.\u00a0<\/span><\/span><\/span><\/span><\/p>\n

Manual Configuration:<\/span><\/u><\/span><\/h3>\n

If you want to configure the setting manually.\u00a0<\/span><\/span><\/span><\/span>
\nFollow the above settings and , Instead of enabling automatic configuration select Static IP Address and enter the IP details.<\/span><\/span><\/span><\/span><\/p>\n

IP address\u00a0\u00a0\u00a0\u00a0 – 192.168.1.2 <\/span><\/span><\/span><\/span><\/div>\n
Subnet Mask – 255.255.255.0<\/span><\/span><\/span><\/span><\/div>\n

Gateway Addres – 192.168.1.1<\/span><\/span><\/span> <\/span>
\n
\n<\/span><\/p>\n

\"BSNL<\/a><\/span><\/div>\n


\n<\/span>
\n<\/span><\/p>\n

<\/a><\/span><\/div>\n


\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span> DSN addres:\u00a0<\/span>
\nDns server address varies state to state <\/span>
\n
\n<\/span> After saving the above settings, you can login to the broadband modem through web browser using IP- 192.168.1.1 (user- admin, passwd- admin). There you can find the DNS server assigned to the modem. Same IP you can use it here.<\/span>
\n
\n<\/span> Without configuring DNS net surfing will not work.<\/span>
\n
\n<\/span> IF the DNS service is enabled in your modem, then you can use the modem IP(192.168.1.1) as a DNS server IP <\/span>
\n
\n<\/span><\/p>\n

<\/a><\/span><\/div>\n

\u00a0 <\/span><\/span><\/span><\/span>
\n
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/span> Click Close<\/span><\/span>
\nNow you can surf from your system.<\/span><\/span>
\nSame procedure can be used for Fedora Linux, Redhat Linux <\/span>
\n<\/span><\/span><\/p>\n

Configure Through Shell\u00a0<\/span><\/u><\/span><\/h3>\n

For Fedora Linux<\/span><\/span><\/u><\/span>
\nedit \/etc\/sysconfig\/network-scripts\/ifcfg-eth0<\/span><\/span>
\nand add the below configuration<\/span><\/span>
\n#vim \/etc\/sysconfig\/network-scripts\/ifcfg-eth0 <\/span><\/span><\/p>\n

DEVICE=eth0
\nONBOOT=yes
\nBOOTPROTO=static
\nIPADDR=192.168.1.2
\nNETMASK=255.255.255.0<\/span><\/span><\/i><\/div>\n

GATEWAY=192.168.1.1<\/span><\/i>
\n<\/span><\/span>
\nSave the file<\/span><\/span>
\nedit Resolve config\u00a0 <\/span><\/span><\/p>\n

#vi \/etc\/resolv.conf<\/span><\/span><\/div>\n

nameserver primarydnsserver
\nnameserver 192.168.1.1<\/span>\u00a0<\/span><\/span><\/i>
\n#service network restart<\/span><\/span><\/div>\n","protected":false},"excerpt":{"rendered":"

BSNL or Airtel Broadband Internet Configuration for Ubuntu \/Fedora \/Redhat Linux There is no special settings required for connect and configure BSNL Broadband mode on Linux platforms. BSNL Broadband modem… Read more »<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1242,1243],"tags":[1606],"class_list":["post-2942","post","type-post","status-publish","format-standard","hentry","category-broadband","category-bsnl","tag-broadband"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t